DYNAMO

LUCAS DYNAMO ONDERDELEN

Lucas dynamos are often a source of trouble. But we have most parts to fix them again. Armatures, fieldcoils, brushes and bearings. When ordering armatures,please measure the length and have a good look at the drive end. When you replace all the 50year old parts and wiring and fit an electronic regulator/cut out switch (don't mess with those mechanical nightmares, you're not going to win) and use a fresh battery, it will be reliable for years to come, even at 12Volts. But the capacity remains limited. Try to cut down on power consumption by using LEDs.

CONNECTOR

DYN188818

Dynamo, regulator and taillight connector.

END COVER 40W DYNAMO EARLY

DYN200032

This one is found on many WD machines. It has a cast in bearing cage. Brushes are not included.
Original LUCAS new old stock. Some cleaning may be necessary after 70 years.

END COVER 40W DYNAMO EARLY

DYN200032E

This one is found on many WD machines. It has a cast in bearing cage. Brushes are included.
Replica.

SPRING

DYN200079

Spring for all dynamo brushes

FIELDCOIL 45 WATTS DYNAMO

DYN200188

Small coil for the short (45Watt) dynamo.
Length of coil about 68mm.
Please note that the shape will change when you pull the coil against the dynamo body.
It is wise to order a new screw, these are often knackered once you've undone them.

ARMATURE MAGDYNO

DYN200572

armature short dynamo (45W) Magdyno, rewound 166mm

FIELDCOIL 60W

DYN200731

Suitable for all long (60Watt) dynamos.
Length of coil 93mm.
Please note that the shape will change when you pull the coil against the dynamo body.
It is wise to order a new screw, these are often knackered once you've undone them.