a_mannetje650

 
 
 
 
 
Tel. 0031-592-421519

Welcome to Peter's Classic Bike Parts webshop. I sell parts for most British motorcycles 1938-1985, the year I opened the shop. The stock of new parts is HUGE. If it wears out, gets chopped or falls off a British bike, you'll probably find it here.

!

COMPLETE 6 1/2" HEADLAMP

VER612
!
Black, including switch and ammeter. No "E" marking in glass.
DU42

CHRONOMETRIC SCREW ON BEZEL

TEL7
!

 

 

 

 

 

Fits Smith's Chronometric (the mechanical) speedos.
Threaded inside
Good replica, chrome plated.

2" OIL TANK CAP, BAYONET, VENTED

TC003V
!

Ventilation hole in top.
Genuine Ceandess

BAKELITE END COVER K2F WITH CUT OUT WIRE

MAG458619
!
End cover for K2F twin magneto

CLUTCH CABLE TRI SINGLES AND TWINS, 54-57,51"

KAB794
!

All twins 1954-1957, including TRW500 and also 3HW, 3S
Triumph numbers 60-0307 or D307

HIGH FREQUENCY HORN 6V

HF1441
!
Beautiful copy of this Lucas motorcycle horn. As used on many British bikes.
6Volts

TIMING DISC

GER360
!
Fit it to the camshaft or crank, put the piston in top dead centre, mark this point with a felt tip or a wire, put the bike in gear, turn the rear wheel backwards, then forwards and you'll notice the position of the crank on this gorgeous plastic dial!
If fitted to the camshaft divide by 2.

CLUTCH SCREWDRIVER

GER180
!

Clutch screwdriver that works on all Triumph, AMC and Burman clutches. And many BSA's and Nortons.

FOOTREST RUBBERS

82-9602
!
Footrestrubbers that fit all BSA's  pre1971
Price for 2

CLUTCH RUBBERS SET OF 6

57-1722/3
!
Clutch shock absorber rubbers for 3 legged spider.
BSA numbers 68-3281, 68-3282

BURMAN KICKSTART LEVER WITH RUBBER

BURG43-2/G45-1
!
Rigid type. Fits every Burman gearbox 1938 onwards (and probably a lot of earlier ones too). Can also be used as a gear lever on some bikes. Diameter between splines16,9 mm.
Chrome plated; excellent quality. (These do NOT bend on the second kick) Rubber and bolt included.
Ariel, AJS, Matchless, Panther, Vincent Comet.

HORN PUSH 1"

VER712A
!

Horn push switch for 1" handlebars.