BSA-TRIUMPH TYPE CLUTCH

This clutch was used on some of the later A7 and A10's. It will fit the STD and RRT2 gearboxes. Basically it is the same clutch Triumph used since 1938.

TRIUMPH/BSA CLUTCH ADAPTOR

42-3170

TAPER FROM 18,04 TO 16MM

BSA part to fit a Triumph type clutch on a STD box.
EXTRACTOR see GER127

Tapered from 18,04mm to 16mm

PRESSURE PLATE 4 SPRING

42-3173

Steel BSA clutch pressure plate, no adjuster.

CLUTCH SPRING BOLT EARLY TYPE

42-3189

1 5/8" UH
Triumph number 57-4754

TAPERED WASHER 4 SPRING CLUTCH

42-3237

CLUTCH CENTRE NUT 5/8"

42-3267

CLUTCH ROLLER 1/4" X 5,95MM

57-0394

Typical Triumph clutch roller. Fits all twins 1938-1985
You need 20x per bike
Also used on BSA A50/65; BSA number: 42-3206
Burman CP clutch uses the same 24x