BSA ROUES
Wheels and wheel parts on BSA interchange on many models. The use of a factory parts book is strongly recommended. Please check very carefully before ordering.
From 1968 to 1970 BSA used the famous Twin Leading Shoes (TLS) front brake in common with Triumph.
BSA used wide 5/8 x 3/8" (Jap 530) chain and narrow 5/8 x 1/4" (Jap 520). You'll often find bikes with the wrong width of chain...But that is not a problem as long as the front and rear sprocket are of the same type.
!

A65 FRONT BRAKE COVER PLATE

37-2240X
!
11 INCH DIAMETER,
Vertical slots

BEARING REAR WHEEL SPROCKET

89-3022
!
Genuine RHP LJ1 ball bearing.
1" x 2 1/4" x 5/8"

BOLT/NUT R/BRAKE DRUM

67-6038
!
As used on drum 65-6294
Round head with a flat side.

BRAKE CAM

65-5905
!

BRAKE DRUM

65-6294
!
Brake drum and sprocket for B31/33 plungerframe. Narrow sprocket, 5/8 x 1/4", 42T. Quickly detachable, large centre hole.
Bolts: 67-3038
British Made.

BRAKE FULCRUM

65-5899
!

BRAKE LEVER FRONT

42-5886
!
Fits full width BSA hub, chrome plated.

BRAKE SHOES

65-5901
!

Used on front brakes B31 rigid and plunger frames, B31, B32 , B34swinging arm frames. A65 pre 1971 rear brake.
Only on half width drums.
drum size is 180 mm x 28mm.
Price for a pair

CHROME HUB COVER 8" BRAKE

42-5844
!

Fits over 22,8mm hub.
Triumph number 37-2211

CLOSED WHEELBEARING UNIT SINGLES

37-2298
!
7/8" x 2" x 9/16"

COVER QD HUB

67-6133
!
Chrome plated, outer diameter 110mm.

DISTANCE SLEEVE REAR HUB

67-6027
!
Late A7/10 and early A50/65