Double-déclic ici pour changer limage
OUTILS
Cliquez ici pour éditer l'introduction
!
Cliquez ici pour éditer la description
!

FEELER GAUGES IMPERIAL
GERFG
!
Inch sizes

FORK ASSEMBLY TOOL
GER91
!

This tool is ideal for pulling the stanchions through the yokes. Especially when you need to pass through lamp brackets, this is the only way to do the job without going crazy.
Various heads for all British bikes.:
1" 16 X 26TPI
1" X 20TPI
1 1/6" X 28TPI
1 18" X 20TPI
1 3/16" X 20TPI
1 1/16" X 20TPI
15/16" X 20TPI

TIMING DISC
GER360
!
Fit it to the camshaft or crank, put the piston in top dead centre, mark this point wire a felt tip or a wire, put the bike  in gear, turn the rear wheel backwards, the forwards and you'll notice the position of the crank on this gorgeous plastic dial!
If fitted to the camshaft divide by 2.

COMPRESSEUR DE RESSORTS
GER211
!
Comprimez-les ressorts de soupape sans risque.Pour toutes le culasses avec le soupapes en tête.

OUTIL DE RAYONS
GER196
!
Valable pour toutes tailles de nipples.

GUDGEON PIN EXTRACTOR
GER181
!

Press your gudgeon/wrist pin out of the piston without hammers, stress and trauma to your conrod. All common sizes can be tackled with the four different heads

TOURNEVIS D'EMBRAYAGE
GER180
!

Pour regler l'embrayage sur  Triumph, AMC et Burman. Aussi pour pas mal de  BSA's et Nortons.

WIRE TWISTER
GER10
!
Safety wire tool.

OUTILS POUR LE DEMONTAGE ET MONTAGE DE GUIDES SOUPAPES
GER175
!
A drift to whack it out and a puller to get them back in the head. Warm it up first though.

PISTON RING COMPRESSOR
!

SPARK PLUG BRUSH
!
Copper wire brush for dirty spark plugs